Quick Answer: Why Is My Tub Stained Blue?

How do you fix a discolored bathtub?

For Red or Black Stains, Use Baking Soda and Hydrogen Peroxide.

Use the brightening power of baking soda and hydrogen peroxide to remove tough red or black stains.

Do not use this method on an acrylic tub—it may scratch the surface.

Mix two parts baking soda and one part hydrogen peroxide to form a paste..

How do you get rid of blue stains?

If the blue staining is from a water issue, mix ½ cup of bleach and ½ cup of warm water and use a soft, white cloth to blot the blue staining with the solution. If the staining is from laundry detergent, a stain remover or laundry aid, mix 1 cup of white vinegar and 1 qt. of water in a container.

Why are toilet seats Discoloured?

The discoloration could be the sun, but it could also be caused by the cleaning products used on it. Toilet’s typically don’t come with toilet seats, unless they are non-standard. So the builder/plumber buys the toilet seat separately when installing a new unit.

Can bleach damage a bathtub?

Simply pouring undiluted bleach directly onto the bathtub surface may cause the porcelain or other material to become permanently discolored. Bleach has enough strength to work even with heavy dilution, so it’s always best to mix it with water for a diluted cleaning solution that’s safer to use.

How much does it cost to re enamel a bathtub?

Cost also varies, but most homeowners appear to be spending around $550 for the service. Some homeowners say that they have paid $250-$300 for bathtub refinishing, but these also tend to be the homeowners complaining about the poor quality.

Why does bleach turn my tub Brown?

Step 1: The Magic Ingredient Why the tub turned red: The bathtub is an old porcelain with a ferrous (iron) component. The chlorine element in a classic chlorine-based bleach oxidizes the iron from the porcelain. Oxidized iron is rust, hence the rusty red color.

How do you get blue stains out of a bathtub?

Cleaning the bluish-greenish stains caused by corroding pipes is easy. Just mix vinegar and baking soda into a paste, apply to the stains and wait about 10 minutes before wiping off. To prevent these stains, you’ll want to have your water tested to see what is making your water so corrosive.

How do you get blue stains off a toilet seat?

Rubbing alcohol is a great choice for removing dyes from almost any surface. Soak a paper towel or cloth with the alcohol, then lay the cloth over the stain. Let the alcohol soak for a few minutes, then scrub the area with a scrub brush or sponge. Repeat the process as many times as needed to remove the stain.

How do I get my tub white again?

To remove hard-water stains from your tub, pour in 3 cups white vinegar under running hot tap water. Let the tub fill up over the stains and allow it to soak for four hours. When the water drains out, you should be able to easily scrub off the stains. See over 100 more household vinegar uses.

How do you clean a badly stained bathtub?

HOW TO REMOVE TOUGH STAINSMake a bathtub cleaner paste of one part hydrogen peroxide to two parts baking soda (or cream of tartar).Rub the paste on the stain and let stand for 30 minutes to one hour, then wipe and rinse.If necessary, repeat until the stain is gone.

What causes yellow stains on toilet seat?

Hard water can damage your toilet seat as well as sinks by leading yellow stains. These stains are so stubborn that they seem impossible to remove. This water includes iron, magnesium, and calcium, which stick to the surface and create a yellowish layer.